How to split the electricity bill fairly when AC use differs
Short answer: work out roughly how many units each AC used, charge each AC's owner for those units at the bill's average rate, and split everything left over equally. If that's too fiddly, agree shares instead (say 2 for the room with the AC that runs all night, 1.5 for the one that runs sometimes, 1 for no AC) and use them every month. Either way, add the bill to SplitPe: split by shares or exact amounts to the paisa, attach the bill photo, and settle it with the rent through Pay with UPI. It's free forever.
Electricity is the bill that causes the most quiet resentment in Indian flats. In winter it's ₹1,500 and nobody cares. In May it's ₹5,000 and the flatmate without an AC is paying a third of someone else's cooling. A 1.5-ton AC can easily use more power than everything else in the flat put together, so splitting equally stops being fair the moment the AC comes on.
Here are four ways to handle it, from simplest to most exact, with the same example worked through each.
The example flat
Three flatmates in Bengaluru. The May bill is ₹4,800 for 600 units, an average of ₹8 a unit including fixed charges and taxes.
- Aman has an AC and runs it about 6 hours every night.
- Bhavna has an AC and runs it about 3 hours a night.
- Chirag has no AC.
Method 1: split equally
₹4,800 ÷ 3 = ₹1,600 each.
This is fine in winter or when everyone uses about the same. In this flat it means Chirag pays ₹1,600 for a month in which his own use was a fan, a laptop and his share of the fridge and geyser. Use it only when AC use is similar, or when nobody minds.
Method 2: split by shares
Agree a number of shares for each room and use them every month the ACs are on. For example: Aman 2, Bhavna 1.5, Chirag 1, a total of 4.5 shares.
₹4,800 ÷ 4.5 = ₹1,066.67 a share.
| Flatmate | Shares | Pays |
|---|---|---|
| Aman | 2 | ₹2,133.33 |
| Bhavna | 1.5 | ₹1,600.00 |
| Chirag | 1 | ₹1,066.67 |
| Total | 4.5 | ₹4,800.00 |
Shares are the best trade-off for most flats: one conversation, no meter-reading, and roughly fair. You can switch back to equal shares from October to March.
Method 3: estimate each AC's units
This is fairer when AC use is very different, and it only takes a few minutes once.
Step 1: estimate units per hour. A 1.5-ton inverter AC typically uses around 1 to 1.5 units (kWh) an hour, depending on its star rating, the room and how low the thermostat is set. The energy label on the AC gives its yearly units, which is a good check. We'll use 1.2 units an hour.
Step 2: estimate each AC's units for the month.
- Aman: 6 hours × 30 nights × 1.2 = 216 units
- Bhavna: 3 hours × 30 nights × 1.2 = 108 units
Step 3: charge each AC at the bill's average rate. The average rate is the total bill divided by total units: ₹4,800 ÷ 600 = ₹8.
- Aman's AC: 216 × ₹8 = ₹1,728
- Bhavna's AC: 108 × ₹8 = ₹864
Step 4: split what's left equally. ₹4,800 − ₹1,728 − ₹864 = ₹2,208 for the fridge, lights, geyser, fans and Wi-Fi router. ÷ 3 = ₹736 each.
| Flatmate | AC | Common share | Pays |
|---|---|---|---|
| Aman | ₹1,728 | ₹736 | ₹2,464 |
| Bhavna | ₹864 | ₹736 | ₹1,600 |
| Chirag | — | ₹736 | ₹736 |
| Total | ₹2,592 | ₹2,208 | ₹4,800 |
Notice how different this is from an equal split: Chirag pays less than half of ₹1,600, and Aman pays about a third more than he would by shares. That's what an AC that runs every night actually costs.
Why the average rate and not the top slab rate? Most state tariffs charge more per unit as usage climbs, so you could argue the AC units are the expensive ones. That's true, but it's hard to agree on and the difference is usually small. The average rate is simple, everyone can check it from the bill, and it's what most flats settle on.
Method 4: measure it
If the numbers are big or someone disputes the estimate, measure instead of guessing.
- A plug-in energy meter. These cost from a few hundred rupees to around ₹1,500 and show the units used by whatever is plugged into them. They only work with ACs that plug into a socket rather than being wired in.
- A sub-meter on the AC's circuit, installed by an electrician. More work, but permanent and exact. Common in PGs that charge AC rooms separately.
- Smart plugs or the AC's own app. Many newer ACs show units used in their app. Screenshot it on the bill date.
Note the readings on the same day the main meter is read, take a photo, and use Method 3 with the measured units instead of estimates.
The other things that change the bill
- Someone was away. If a flatmate was home for ten days of the month, it's fair to reduce their share of the common part, not their AC part (their AC was off anyway). See paying bills when a flatmate is away.
- Work from home. One person running a desktop, monitor and fan eight hours a day uses more than someone out at the office. It's usually small next to an AC, but if it bothers anyone, give them a slightly bigger share.
- The geyser in winter. Geysers are the winter AC. The same methods work.
- Fixed charges. The bill's fixed or demand charge doesn't depend on use. Strictly it should be split equally, but including it in the average rate is simpler and the difference is a few rupees.
Agree it before summer
The easiest time to agree an AC rule is March, before the first big bill arrives. Write down which method you'll use, the shares or the hours, and when it switches back. It's a good line for a flatmate agreement, next to rent shares and the maid.
Doing it in SplitPe
Whoever pays the electricity bill adds it as an expense in your flat's group.
- For shares, split it by shares and set 2, 1.5 and 1. SplitPe works to the paisa, so the three shares always add up to exactly the bill.
- For Method 3, split it by amounts and enter ₹2,464, ₹1,600 and ₹736. Or split it with changes: equally, with each AC's cost added to its owner's share.
- Attach a photo of the bill and the meter reading so anyone can check it later, and add a comment with the hours or shares you agreed if someone asks.
The bill then joins the rent, Wi-Fi and groceries in one running balance, and you settle everything together at month end with the fewest payments. If the same bill comes every month, like a fixed Wi-Fi plan, set it to repeat and it adds itself; electricity changes every month, so add it when it arrives. At settle-up, Pay with UPI opens GPay, PhonePe, Paytm or BHIM with the amount filled in and records it. SplitPe is free forever with no limits, on every platform: Android, iPhone and the web: open SplitPe.
Questions
Is it fair to split the electricity bill equally if one flatmate has an AC?
Not usually. A 1.5-ton AC running every night can use more power than the rest of the flat combined. Use shares, or charge the AC's estimated units to its owner and split the rest equally.
How many units does an AC use per hour?
A 1.5-ton inverter AC typically uses around 1 to 1.5 units an hour, depending on its star rating, the room and the thermostat setting. The energy label shows its yearly units.
How do I calculate the cost of AC use from the electricity bill?
Divide the total bill by the total units to get the average rate. Multiply the AC's units (hours × units per hour, or a meter reading) by that rate. The average rate is simpler than the slab rate, easy to check from the bill, and close enough for most flats.
What shares should we use for AC and non-AC rooms?
A common starting point is 2 for a room whose AC runs every night, 1.5 for occasional use and 1 for no AC. Adjust after the first bill if it feels off.
What's the best app to split the electricity bill with flatmates?
SplitPe. It splits by shares, exact amounts or adjustments to the paisa, keeps the electricity in one running balance with rent and groceries, and settles up through your UPI app. It's free forever with no limits.